Installing Radbot is simple and only takes a few minutes. No need for a plumber.
1. Select the radiator you are going to install Radbot on
2. Remove the old thermostatic valve head
3. Select and fit the correct adaptor
4. Insert the batteries
5. Fit and tighten
6. Job done!
It’s really simple.
Apart from the clever bit going on inside, Radbot works like just like a regular radiator thermostat. Set the comfort level you want and Radbot warms the room when required.
It does have a handy boost button. If you ever need a bit more heat press the button at the top and it will give you a blast for 30 mins before returning to its original temperature. No need for you to remember to turn it back down again!
Download the user guide or browse the FAQs for more information.
What’s in the box
A smart thermostatic radiator control device.
Compatible with wet central heating systems with radiators that have existing thermostatic radiator valves fitted. Supplied with 6 valve adaptors.
1 Radbot device
6 Valve adaptors
2 x 1.5V AA batteries
Quick reference guide
2 x 1.5V AA batteries (supplied), battery life approx. 2 years
Temperature / humidity / ambient light
90 x 55 x 55 mm
Changing the batteries
Radbot comes supplied with two AA batteries. Under normal conditions, the battery should last for approx. 2 years. For more information on using Radbot please browse our instruction manual or watch the video.
If you have any questions around batteries or require some additional support please browse our FAQs or get in touch.
Need more help?
Contact us and we will be happy to assist.